Skip to main content
Version: 5.32

HMI Configuration

The CC613 Charge Controller and variants can be expanded with a display module (DPM2x16FP) and an RFID module (RFID117-L1) to offer an interface for user interaction.

Display​

Goal​

  • Activate a display that has already been wired up to a Charge Controller
  • Get an overview over what type of information is displayed
  • Changing languages
  • How to set up a single display with 2 Charge Controllers (Master-Slave)

Overview​

A correctly set up display shows the following information to EV drivers while the charging is in progress:

  • Charging time
  • Energy
  • Power

Activating the display​

The Display is already activated by default.

Relevant configuration options​

Ifandset Type of Display to
No display is in useDisplay not configured
A display is connectedyou don't want the display to show informationDisplay not in use
you want the display to show informationBender LCD-Module DPM2x16FP

Configuring the display on Master-Slave and standalone setups​

Set Mode for Display to Main.

Location in Legacy DashboardParameterValueInformation shown
ManufacturerMode for DisplayMaster-SlaveThe Display is in split mode. Information of both Charge Controllers displayed at the same time.
MainThe Displays shows the information of the main Charge Controller.

Changing what information is displayed​

if you want this to be shown on the displayset this value
Display charging timeOn
Display energyOn
Display powerOn

Changing the display language​

  1. Apply the following configuration:

Location in Legacy DashboardParameterValueInfo
OperatorLanguage of DisplayEnglishShows the information in English.
Deutsch/GermanShows the information in German.
Multi-Language EN-DE-FR-NL>Shows the info in different languages by alternating the messages shown on the display
  1. At the bottom of the window, click , then click to apply the changes

RFID​

The RFID module is used in combination with the charge controller within a charging system to authorize charging transactions.
One of the most important means of authentication at charging points is RFID (radio-frequency identification) chips. This also includes NFC (Near Field Communication) technology. These form the basis of all charging cards. Central to the identification is the so-called UID (Unique Identification) of an RFID chip. This is a unique code that represents the identity of a chip.

LED status​

BehaviorMeaning
The Charging System is free and ready for use.
The Charging System is reserved for another user.
WHITE rotatingThe authorization process is running. Please wait.
The presented RFID card has been accepted. Vehicle is not yet connected or has just been disconnected from the charging system.
Charging has been authorized. The vehicle is charging.
The presented RFID card has been rejected.
Due to technical errors the Charging Station is out of order.
The Charging station is being updated.
info

When presenting a RFID that either has not been presented for a while or has never been presented, it might take some time for the backend to recognize the RFID. When the LED´s show that the card has been rejected, wait some time and present it again.

Charge Controller LED indications​

The status LED`s are to be found on the front of the controller.
ColorMeaning
ORANGEPower on, System booting
Embedded Linux is starting
Application starting
System running, system ready for operation
System error
Last updated on