Mapping between configuration keys & parameters
Mapping of OCPP key names, web page parameters names and configuration file names. Note that Master-Slave Scope applies for OCPP keys only and not for Web page parameters.
| Web page key name | Master-Slave Scope | Reboot Required | OCPP Key Name | OCPP Standard | Configuration File Name |
|---|---|---|---|---|---|
| RCMB Delta | Both | No | RCMBDelta | No | RCMBThreshold_rcmb |
| Maximum RMS value of last transaction | Individual | No | RCMBTransactionMaxRMS | No | RCMBTransactionMaxRMS_rcmb |
| Maximum DC value of last transaction | Individual | No | RCMBTransactionMaxDC | No | RCMBTransactionMaxDC_rcmb |
| Welded contactor detection | Individual | Yes | WeldCheck | No | WeldCheck_rcmb |
| Welded contactor input type | Individual | Yes | WeldCheckInType | No | WeldCheckInType_rcmb |
| Invert meaning of weld check via phase detection | Individual | Yes | WeldCheckPhaseInv | No | WeldCheckPhaseInvert_rcmb |
| Timezone | Both | Yes | No | EbeeAppTimezone_custom | |
| ChargePoint Vendor | Both | Yes | ChargePointVendor | No | ChargePointVendor_branding |
| ChargePoint Model | Not relevant | Yes | ChargePointModel | No | ChargePointModel_branding |
| SSH Access via USB | Individual | Yes | SSHAccessUsb | No | SSHAccessUsb_custom |
| SSH Access via WLAN Hotspot | Individual | Yes | SSHAccessWlanHotspot | No | SSHAccessWlanHotspot_custom |
| SSH Access via WLAN | Individual | Yes | SSHAccessWlanNetwork | No | SSHAccessWlanNetwork_custom |
| SSH Access via Ethernet | Individual | Yes | SSHAccessEth | No | SSHAccessEthernet_custom |
| SSH Access via GSM | Individual | Yes | SSHAccessGsm | No | SSHAccessGsm_custom |
| Geolocation data | Master | No | Geolocation | No | GeolocationDataShown_custom |
| Filter Out Invalid RFIDs | Both | Yes | InvalidRFIDFilter | No | InvalidRFIDFilter_custom |
| Enforce Password change | Both | No | EnforcePwdChange | No | EnforcePwdChange_custom |
| Enforce strong login passwords | Both | No | EnforceStrongLoginPwds | No | EnforceStrongLoginPwds_custom |
| RFID Mode | Both | Yes | RFIDMode | No | RFIDMode_custom |
| Enforce Master RFID | Both | No | EnforceMasterRFID | No | EnforceMasterRFID_custom |
| Enforce using Secure RFID | Both | No | EnforceSecureRFID | No | EnforceSecureRFID_custom |
| Controller serial number | Individual | Yes | ChargeBoxSerialNumber | No | SerialNumber_custom |
| Manufacturer serial number | Master | Yes | ChargePointSerialNumber | No | SerialNumberManufacturer_custom |
| User Password | Both | No | No | UserPwdPlain_custom | |
| Installer Password | Both | No | No | InstallerPwdPlain_custom | |
| Operator Password | Master | No | No | OperatorPwdPlain_custom | |
| Manufacturer Password | Not relevant | No | No | ManufacturerPwdPlain_custom | |
| Factory Reset by RFID | Individual | No | MasterRFIDstoReset | No | ResetToDefaultsRFID_custom |
| Reset Password PUK | Individual | No | No | ResetPasswordPUK_custom | |
| State page password protection | Both | Yes | No | StatePageLock_custom | |
| Giro-E Short Bank Code filter (5 digits) | Individual | Yes | GiroEShortBLZFilter | No | GiroEShortBLZFilter_custom |
| Authorization Input Mode | Not relevant | Yes | AuthorizationInputMode | No | AuthorizationInputMode_custom |
| Authorization Input Switch Type | Not relevant | Yes | AuthorizationInputType | No | AuthorizationInputType_custom |
| Door hatch installed | Master | Yes | DoorHatchInstalled | No | DoorHatchInstalled_custom |
| Log Level | Both | No | loglevel | No | LogLevel_custom |
| Exclusive GLS authorization | Individual | No | GiroEAuthExclusiveGLS | No | GiroEAuthExclusiveGLS_custom |
| State 'unavailable' at FW update begin | Both | No | No | UnavailAtFwUpdateBegin_custom | |
| Restore Time | Not relevant | Yes | No | RestoreTime_custom | |
| Power source voltage | Individual | Yes | PowerLineVoltage | No | PowerSourceVoltage_custom |
| Mains frequency | Individual | Yes | MainsFrequency | No | MainsFrequency_custom |
| Maximum Voltage | Individual | Yes | No | VoltageMonitorMax_custom | |
| Minimum Voltage | Individual | Yes | No | VoltageMonitorMin_custom | |
| High voltage hysteresis threshold | Individual | Yes | No | VoltageUpperDebounceThr_custom | |
| Low voltage hysteresis threshold | Individual | Yes | No | VoltageLowerDebounceThr_custom | |
| Master/Slave Mode | Not relevant | Yes | MasterSlaveMode | No | MasterSlaveMode_ms |
| Charging Station single feed settings available to Installer | Both | No | ChargingStationSingleFeedAvailToInstaller | No | ChargingStationSingleFeedAvailToInstaller_ms |
| Charging Station single feed | Both | Yes | ChargingStationSingleFeed | No | ChargingStationSingleFeed_ms |
| RFID Slave | Not relevant | Yes | RFIDSlave | No | RFIDSlave_ms |
| Slave Garo | Not relevant | Yes | No | GaroSlave_ms | |
| Force firmware update on master | Master | No | FwUpdateForceMaster | No | ForceFwUpdateMaster_ms |
| Email notification in case of errors | Master | Yes | No | EmailEnabled_mail | |
| Email provider account username | Master | Yes | No | EmailUsername_mail | |
| Email provider account password | Master | Yes | No | EmailPassword_mail | |
| SMTP server and port | Master | Yes | No | EmailServerPort_mail | |
| SMTP connection security | Master | No | No | EmailConnSecurity_mail | |
| Location of CC in outgoing emails | Master | Yes | No | EmailCpLocation_mail | |
| 'From:' address in outgoing emails | Master | Yes | No | EmailFromAddress_mail | |
| 'To:' address in outgoing emails | Master | Yes | No | EmailToAddress_mail | |
| Send test email | Master | No | No | EmailTestSend_mail | |
| LED Brightness | Not relevant | No | No | LedBrightness_hmi | |
| LED Type | Not relevant | No | LedType | No | LedType_hmi |
| Dual LED board mode | Not relevant | No | DualLedMode | No | DualLedMode_hmi |
| Type of Display | Not relevant | No | DisplayType | No | DisplayType_hmi |
| Mode for Display | Not relevant | No | DisplayMode | No | DisplayMode_hmi |
| Display charging time | Not relevant | No | DisplayContentSelectorTime | No | DisplayContentSelectorTime_hmi |
| Display energy | Not relevant | No | DisplayContentSelectorEnergy | No | DisplayContentSelectorEnergy_hmi |
| Display power | Not relevant | No | DisplayContentSelectorPower | No | DisplayContentSelectorPower_hmi |
| HMI Pattern On Relay 2 (K2) | Not relevant | No | PatternOnRelayK2 | No | HMIPatternOnRelayK2_V2_hmi |
| Language of Display | Individual | No | DisplayLanguage | No | DisplayLanguage_hmi |
| Enable sound | Individual | No | No | SoundEnable_hmi | |
| Enable lantern | Individual | No | No | LanternEnable_hmi | |
| Comtraxx Brightness | Not relevant | No | No | ComtraxxBrightness_hmi | |
| LED color scheme | Both | Yes | No | LedColorScheme_hmi | |
| HMI beep | Both | Yes | No | LedMkBeep_hmi | |
| Ring color scheme | Individual | No | No | RingColorScheme_hmi | |
| CC613 Buzzer Test | Individual | No | No | CC613BuzzerTest_hmi | |
| HMICP board software version | Master | No | No | HMICpFirmwareInfo_hmi | |
| Schuko Socket | Not relevant | Yes | OCPPSchuko | No | Schuko_vehicleif |
| Plug Cycles Schuko | Individual | No | ResetSchukoPlugCounterTo | No | SchukoPlugCounter_vehicleif |
| Plug Cycles Schuko | Not relevant | No | SchukoPlugCounter | No | SchukoPlugCounterRO_vehicleif |
| Contactor Cycles Schuko | Individual | No | ResetSchukoContactorCounterTo | No | SchukoNumberContactorCycles_vehicleif |
| Contactor Cycles Schuko | Individual | No | ContactorCyclesSchuko | No | SchukoNumberContactorCyclesRO_vehicleif |
| Plug Lifetime Schuko | Not relevant | No | No | SchukoPlugLifetime_vehicleif | |
| Schuko Fixed Current | Individual | Yes | SchukoFixedCurrent | No | SchukoFixed_Current_vehicleif |
| Actuator type | Not relevant | Yes | No | ActuatorType_vehicleif | |
| Actuator type | Not relevant | Yes | EOActuatorType | No | EO_ActuatorType_vehicleif |
| Type 2 Contactor Lifetime | Individual | Yes | Type2ContactorLifetime | No | Type2ContactorLifetime_vehicleif |
| Type 2 Plug Lifetime | Individual | Yes | Type2PlugLifetime | No | Type2PlugLifetime_vehicleif |
| Type 2 Plug Cycles | Individual | No | ResetType2PlugCounterTo | No | Type2PlugCounter_vehicleif |
| Type 2 Plug Cycles | Not relevant | No | Type2PlugCounter | No | Type2PlugCounterRO_vehicleif |
| Contactor Cycles Type2 | Individual | No | ResetType2ContactorCounterTo | No | Type2NumberContactorCycles_vehicleif |
| Contactor Cycles Type2 | Individual | No | ContactorCyclesType2 | No | Type2NumberContactorCyclesRO_vehicleif |
| Threshold Contactor Current Under Load [A] | Individual | Yes | ThresholdContactorCurrentUnderLoad | No | ThresholdContactorCurrentUnderLoad_vehicleif |
| Contactor Cycles Under Load Limit | Individual | Yes | No | ContactorCyclesUnderLoadLimit_vehicleif | |
| Contactor Cycles Under Load | Individual | No | ResetCountforContactorCyclesUnderloadTo | No | ResetCountforContactorCyclesUnderloadTo_vehicleif |
| Count Contactor Cycles Under Load | Individual | No | CountContactorCyclesType2UnderLoad | No | CountContactorCyclesType2UnderLoad_vehicleif |
| ADC CP line calibration reference value | Individual | No | No | AdcCpCalibrationVal_vehicleif | |
| ADC CP line calibration reference value for 5% | Individual | No | No | AdcCpCal5PerCentVal_vehicleif | |
| Fixed cable attached | Not relevant | Yes | CableAttached | No | CableAttached_vehicleif |
| Redetect actuator | Individual | No | RedetectActuator | No | RedetectActuator_vehicleif |
| Detect Control Pilot Diode | Individual | No | CPDiodeDetection | No | DetectCPDiode_vehicleif |
| Lock Actuator only if authorized | Both | No | LockIfAuthorized | No | LockActuatorIfAuthorized_vehicleif |
| Permanently locked cable | Individual | No | LockPermanently | No | LockActuatorPermanently_vehicleif |
| Pause/prevent charging in state D | Both | No | PauseChargingStateD | No | PauseChargingStateD_vehicleif |
| ADC calibration for CP line | Individual | Yes | AdcCpCalibrationCfg | No | AdcCpCalibrationCfg_vehicleif |
| Stop limit in (%) for 'Check for car overload' | Individual | Yes | CheckCarOverCurrentStopLimit | No | CheckCarOverCurrentStopLimit_vehicleif |
| Maximum Current [A] | Individual | Yes | HardwareCurrentLimit | No | HardwareCurrentLimit_vehicleif |
| Installation Current Limit [A] | Individual | Yes | No | InstallationCurrentLimit_vehicleif | |
| Operator Current Limit [A] | Individual | No | OperatorCurrentLimit | No | OperatorCurrentLimit_vehicleif |
| Free Charging | Both | No | FreeCharging | No | FreeCharging_vehicleif |
| Check for car overload | Both | No | CheckCarOverCurrent | No | CheckCarOverLoad_vehicleif |
| Randomize charging after power loss | Both | Yes | RandomRestartAfterPowerLoss | No | RandomRestartAfterPowerLoss_vehicleif |
| Ramp Up time for car simulator | Individual | Yes | No | RampUpTimeCarSim_vehicleif | |
| Ramp Down time for car simulator | Individual | Yes | No | RampDownTimeCarSim_vehicleif | |
| PDL Power | Master | No | PDL_Power | No | PDLPower_vehicleif |
| Delay Status update | Both | No | No | DelayStatusUpdateStartTrans_vehicleif | |
| Phases connected to the ChargePoint | Individual | Yes | No | PhasesNumber_custom | |
| Energy management from external input | Individual | Yes | EnergyManInputPowerLimitCfg | No | InputPowerLimit_energyman |
| Power board | Individual | Yes | PowerBoard | No | PowerBoard_energyman |
| Phase rotation of the ChargePoint | Individual | Yes | ConnectorPhaseRotation | No | PhaseRotationInternal_energyman |
| Phase rotation of the ChargePoint | Individual | Yes | ConnectorPhaseRotationIT | No | PhaseRotationITInternal_energyman |
| Current limit for energy management from external input | Individual | Yes | EnergyManInputPowerCurrentLim | No | InputCurrentLimit_energyman |
| Charging Station Hardware Current Limit [A] | Master | Yes | ChargingStationHWCurrentLimit | No | ChargingStationHWCurrentLimit_energyman |
| Charging Station Installation Current Limit [A] | Master | Yes | No | ChargingStationInstallationCurrentLimit_energyman | |
| HawkBit client | Not relevant | Yes | No | HawkBitEnableConfiguration_hawkbit | |
| HawkBit server base URL | Not relevant | Yes | No | HawkBitBaseUrl_hawkbit | |
| HawkBit client controller ID | Not relevant | Yes | No | HawkBitControllerId_hawkbit | |
| HawkBit client tenant ID | Not relevant | Yes | No | HawkBitTenantId_hawkbit | |
| HawkBit client authorization token | Not relevant | Yes | No | HawkBitAuthToken_hawkbit | |
| HawkBit client force HTTPS | Not relevant | No | No | HawkBitForceHttps_hawkbit | |
| DataTransfer for Tariff And Total Usage | Both | No | DataTransferTariffUsage | No | TariffAndUsageDataTransfer_ocpp |
| Reset Meter Value Behavior (S0 and internal meter) | Both | No | ResetMeterValueS0 | No | ResetMeterValues_ocpp |
| Ignore OCPP ParentID | Both | Yes | No | IgnoreParentId_ocpp | |
| Send Authorize for RemoteStart | Both | Yes | AuthorizeRemoteTxRequests | No | AuthorizeRemoteStarts_ocpp |
| If in doubt allow charging | Both | No | AllowOfflineTxForUnknownId | No | IfInDoubtAllowCharging_ocpp |
| Send informative StatusNotifications | Both | No | InfoStatusNotifications | No | InfoStatusNotifications_ocpp |
| Send error StatusNotifications | Both | Yes | ErrorStatusNotifications | No | ErrorStatusNotifications_ocpp |
| Send USB error StatusNotifications | Individual | Yes | UsbErrorStatusNotifications | No | UsbErrorStatusNotifications_ocpp |
| Strategy for StatusNotification state transitions | Both | Yes | StatusNotificationStrategy | No | StatusNotificationStrategy_ocpp |
| Display backend disconnect as error | Master | Yes | DisplayDisconnectAsError | No | DisconnectAsError_ocpp |
| Format of signed meter values | Both | Yes | SignedMeterValuesFormat | No | SignedMeterValuesFormat_ocpp |
| Send meter's public key to backend | Both | No | HTBSendMeterPublicKey | No | HTBSendMeterPublicKey_ocpp |
| Route GLS data through OCPP Backend | Both | No | GlsRouteThroughBackend | No | GLSRouteBackend_ocpp |
| OCPP messaging for GLS transactions | Both | No | GLSOCPPMessagingMode | No | GLSOCPPMessagingMode_ocpp |
| Enable OCPP whitelist | Master | No | AuthorizationCacheEnabled | No | UseCache_ocpp |
| RFID Tag letter case | Both | Yes | idTagLetterCase | No | OCPPIDTagLetterCase_ocpp |
| Stop Transaction On EV Side Disconnect | Both | No | StopTransactionOnEVSideDisconnect | Yes | StopTransactionOnEVSideDisconnect_ocpp |
| Unlock Connector On EV Side Disconnect | Both | No | UnlockConnectorOnEVSideDisconnect | No | UnlockConnectorOnEVSideDisconnect_ocpp |
| Free Charging Mode | Both | Yes | FreeChargingMode | No | FreeChargingMode_ocpp |
| Allow long get configuration keys | Both | Yes | AllowLongOcppGetConfKeys | No | AllowLongOcppGetConfKeys_ocpp |
| Integer values for boolean get configuration keys | Both | No | OcppGetConfBoolIsInt | No | OcppGetConfBoolIsInt_ocpp |
| Stop Transaction on invalid ID | Individual | No | StopTransactionOnInvalidId | Yes | StopTransactionOnInvalidId_ocpp |
| Authorization considering the last vehicle or cable change | Both | Yes | AuthorizeRecentlyConnectedOnly_ocpp | No | AuthRecentlyConnectedOnly_ocpp |
| OCPP ChargeBoxIdentity (ChargePointID) | Individual | Yes | ChargeBoxIdentity | No | ChargePointID_ocpp |
| EVSE Identity | Individual | Yes | EvseIdentity | No | EvseID_ocpp |
| RFID Tag for Free Charging with OCPP Full, fixed rfid modes | Individual | Yes | RfidTagFreeCharging | No | RfidTagFreeCharging_ocpp |
| RFID Tag for Free Charging with OCPP Full, fixed rfid modes (Connector 2) | Individual | No | No | RfidTagFreeChargingConnector2_ocpp | |
| Backend connection timeout | Master | Yes | BackendConnectionTimeout | No | ConnectionTimeOut_ocpp |
| Vehicle connection timeout | Both | Yes | ConnectionTimeOut | No | VehicleConnectionTimeout_ocpp |
| Number of transaction message attempts | Individual | Yes | TransactionMessageAttempts | Yes | TransactionMessageAttempts_ocpp |
| Number of Eichrecht transaction message attempts | Individual | Yes | EichrechtTransactionMessageAttempts | No | EichrechtTransactionMessageAttempts_ocpp |
| Transaction message retry interval (seconds) | Individual | Yes | TransactionMessageRetryInterval | No | TransactionMessageRetryInterval_ocpp |
| Number of reset retries | Individual | Yes | ResetRetries | No | ResetRetries_ocpp |
| Disallow charging if OCPP queue full | Both | Yes | OcppQueueFullAsErrorState | No | OcppQueueFullAsErrorState_ocpp |
| Local Pre Authorize | Master | No | LocalPreAuthorize | No | LocalPreAuthorize_ocpp |
| Local Authorize Offline | Master | No | LocalAuthorizeOffline | No | LocalAuthorizeOffline_ocpp |
| Force OCPP connector state to available/unavailable | Both | No | No | ForceStateAvail_ocpp | |
| Force Heartbeat request messages | Not relevant | Yes | No | ForceHeartBeat_ocpp | |
| Retransmit MeterValues | Both | No | RetransmitMeterValues | No | RetransmitMeterValues_ocpp |
| ChargePoint UPnP UUID | Individual | Yes | UPnPUUID | No | ChargePointUUID_ocpp |
| Heartbeat interval (OCPP 1.6) | Master | No | HeartbeatInterval | No | HeartBeatInterval_ocpp |
| Stop Transaction Mode | Both | Yes | StopTransactionModeUnplug | No | StopTransactionMode_ocpp |
| USB Field Engineer | Both | Yes | USBFieldEngineer | No | UsbFieldEngineer_usbhotplug |
| USB Config update | Both | Yes | USBConfigUpdate | No | UsbConfigUpdate_usbhotplug |
| USB Firmware update | Both | Yes | USBFirmwareUpdate | No | UsbFirmwareUpdate_usbhotplug |
| USB script execution | Not relevant | Yes | No | UsbScriptExec_usbhotplug | |
| USB Installer Password | Not relevant | No | No | UsbInstallerPasswordPlain_usbhotplug | |
| Average kWh per session | Individual | No | No | AveragekWh_sql | |
| Average duration per session | Individual | No | No | AverageTransactionDurationStr_sql | |
| Average duration per session | Individual | No | No | AverageTransactionDuration_sql | |
| Total Charging Sessions | Individual | No | No | TransactionsInDatabase_sql | |
| This month's transaction count | Individual | No | No | TransactionsThisMonth_sql | |
| This month's kWh consumption | Individual | No | No | TotalkWhThisMonth_sql | |
| OCPP whitelist learning mode | Master | No | No | CacheFillMode_cache | |
| OCPP whitelist expiry mode | Master | Yes | No | CacheExpiryOption_cache | |
| Enable OCPP whitelist | Master | No | LocalAuthListEnabled | No | LocalAuthListEnabled_cache |
| OCPP whitelist version number | Master | No | No | CacheVersion_cache | |
| Local whitelist learning mode | Master | No | No | FLLFillMode_fll | |
| Enable local whitelist | Master | No | fll | No | FllCfg_fll |
| Send OCPP Start/Stop transaction | Both | No | fllUseOcppStartStop | No | FLLUseOcppStartStop_fll |
| Connection Type | Master | Yes | ConnectionType | No | Type_dl |
| Static USB network configuration additional IP | Not relevant | No | No | USBAdditionalIP_dl | |
| Static USB network configuration gateway | Not relevant | No | No | USBAdditionalGW_dl | |
| Static USB network configuration DNS | Individual | No | No | USBAdditionalDNS_dl | |
| Data Consumption | Master | No | DataConsumption | No | DataConsumption_dl |
| Data Consumption Last Month | Master | No | DataConsumptionLastMonth | No | DataConsumptionLastMonth_dl |
| Access Point Name (APN) | Master | Yes | APN | No | APN_modem |
| Network selection mode | Master | Yes | ModemNetworkSelMode | No | NetworkOperSelMode_modem |
| Modem Access Technology | Master | Yes | ModemNetworkType | No | NetworkType_modem |
| Network operator name format | Master | Yes | ModemNetworkOperFmt | No | NetworkOperNameFormat_modem |
| Scan network operators at boot | Master | Yes | ScanNetworkOperators | No | ScanNetworkOps_modem |
| APN Username | Master | Yes | APNUsername | No | APNUsername_modem |
| APN Password | Master | Yes | APNPassword | No | APNPassword_modem |
| Requested Network operator | Master | Yes | Req3GNetworkOperator | No | ReqNetworkOperator_modem |
| Received Signal Strength Indicator (RSSI) | Master | No | RSSI | No | RSSI_modem |
| Mode for ethernet configuration | Master | Yes | NetworkConfigMode | No | NetworkConfig_mode_tcpip |
| Static network configuration IP | Master | Yes | StaticNetworkConfigAddress | No | NetworkConfigStaticAddress_tcpip |
| Static network configuration netmask | Master | Yes | StaticNetworkConfigNetmask | No | NetworkConfigStaticNetmask_tcpip |
| Static network configuration DNS | Master | Yes | StaticNetworkConfigDNS | No | NetworkConfigStaticDNS_tcpip |
| SSL Strictness as client | Master | Yes | SSLModeClient | No | SSLAuthMode_tcpip |
| WAN router | Master | Yes | WANRouter | No | WANRouter_tcpip |
| OCPP Mode | Master | Yes | OCPPMode | No | TCP_IP_MODE_V2_tcpip |
| Connection settings fallback | Individual | Yes | ConnSettingsFallback | No | ConnectionSettingsFallback_tcpip |
| Hostname (Binary OCPP) | Master | Yes | HostnameBinaryOCPP | No | BinaryOCPPHostname_tcpip |
| WebSockets JSON OCPP URL of the Backend | Master | Yes | OCPPBackendJSONURL | No | JsonOCPPBackendURL_tcpip |
| Websockets proxy | Master | Yes | WebsocketsProxyURL | No | WebsocketsProxyURL_tcpip |
| HTTP Basic Authentication password | Master | Yes | HTTPBasicAuthPassword | No | HTTPBasicAuthPassword_tcpip |
| Certificate (OCPP) | Master | No | OcppCertificate | No | OcppCertificate_tcpip |
| Certificate (15118) | Individual | No | 15118EvseCertificateAndChain | No | 15118Certificate_tcpip |
| Certificate signing request (OCPP) | Master | No | OcppCSR | No | OcppCertificateSigningRequest_tcpip |
| User CA Certificate (OCPP) | Master | No | OcppUserCaCertificate | No | OcppUserCaCertificate_tcpip |
| Connection Type (Backend) | Master | No | No | BackendConnectionType_tcpip | |
| Client hostname | Master | Yes | NetworkConfigHostname | No | NetworkConfigHostname_tcpip |
| Static network configuration gateway | Master | Yes | StaticNetworkConfigGateway | No | NetworkConfigStaticGateway_tcpip |
| Port number (Binary OCPP) | Master | Yes | PortBinaryOCPP | No | BinaryOCPPPort_tcpip |
| TCP Watchdog Timeout | Individual | Yes | TcpWatchdogTimeout | No | TcpWatchdogTimeout_tcpip |
| DHCP client request retries | Master | Yes | NetworkConfigDHCPRetries | No | NetworkConfigDHCPRetries_tcpip |
| DHCP client request timeout | Master | Yes | NetworkConfigDHCPTimeout | No | NetworkConfigDHCPTimeout_tcpip |
| DHCP client request delay | Master | Yes | NetworkConfigDHCPDelay | No | NetworkConfigDHCPDelay_tcpip |
| WebSockets keep-alive interval | Master | No | WebSocketPingInterval | No | WebSocketsKeepAliveInterval_tcpip |
| OCPP connection strictness | Master | Yes | OcppConStrictTls | No | OCPPConStrictTls_tcpip |
| WLAN SSID | Master | No | WLANSSID | No | WLANSSID_wlan |
| WLAN password | Master | No | WLANPassword | No | WLANPassword_wlan |
| Static network configuration IP | Master | Yes | WLANStaticNetworkConfigAddress | No | NetworkConfigStaticAddress_wlan |
| Static network configuration netmask | Master | Yes | WLANStaticNetworkConfigNetmask | No | NetworkConfigStaticNetmask_wlan |
| Static network configuration gateway | Master | Yes | WLANStaticNetworkConfigGateway | No | NetworkConfigStaticGateway_wlan |
| Static network configuration DNS | Master | Yes | WLANStaticNetworkConfigDNS | No | NetworkConfigStaticDNS_wlan |
| WLAN enabled | Master | No | WLANEnabled | No | Enabled_wlan |
| Mode for WLAN configuration | Master | Yes | WLANNetworkConfigMode | No | NetworkConfig_mode_wlan |
| DHCP client request retries | Master | No | WLANNetworkConfigDHCPRetries | No | NetworkConfigDHCPRetries_wlan |
| DHCP client request timeout | Master | No | WLANNetworkConfigDHCPTimeout | No | NetworkConfigDHCPTimeout_wlan |
| DHCP client request delay | Master | No | WLANNetworkConfigDHCPDelay | No | NetworkConfigDHCPDelay_wlan |
| Hotspot SSID | Master | Yes | WiFiHotspotSSID | No | SSID_hotspot |
| Hotspot password | Master | Yes | WiFiHotspotPassword | No | Password_hotspot |
| Hotspot subnet | Master | Yes | WiFiHotspotSubnet | No | Subnet_hotspot |
| Hotspot netmask | Master | Yes | WiFiHotspotNetmask | No | Netmask_hotspot |
| Hotspot enabled | Master | Yes | WiFiHotspotEnabled | No | Enabled_hotspot |
| Encryption | Master | Yes | WiFiHotspotEncryption | No | Encryption_hotspot |
| DHCP server enabled | Master | Yes | WiFiHotspotDHCPDEnable | No | DHCPEnabled_hotspot |
| Tcpdump Interface | Individual | No | TcpdumpInterface | No | TcpdumpInterface_diag |
| Start and stop 'tcpdump' run | Individual | No | Tcpdump | No | Tcpdump_diag |
| NTP client | Master | No | No | NTPEnableDisableConfiguration_ntp | |
| NTP server 1 configuration | Not relevant | No | No | NTPServer1_ntp | |
| NTP server 2 configuration | Not relevant | No | No | NTPServer2_ntp | |
| NTP server 3 configuration | Not relevant | No | No | NTPServer3_ntp | |
| NTP server 4 configuration | Not relevant | No | No | NTPServer4_ntp | |
| 15118 Configuration | Both | Yes | Config15118 | No | HlcConfig_15118 |
| SECC Certificate Expiry Date (15118 protocol) | Individual | No | SeccCertExpireDate15118 | No | SeccCertExpireDate_15118 |
| Extra logging | Both | Yes | Log15118 | No | HlcLogging_15118 |
| OCPP 1.6 extension for 15118 certificate installation | Both | Yes | Ocpp16Extension15118 | No | Ocpp16Extension_15118 |
| EVCCID or EV's MAC address prefix for OCPP authorization | Both | Yes | MACEVCCIDPrefix | No | MACEVCCIDPrefix_15118 |
| Autocharge fixed ID | Both | Yes | autochargeid | No | AutochargeFixedID_15118 |
| Autocharge | Both | Yes | Autocharge | No | AutochargeConfig_15118 |
| DC Supported protocol (namespaces) | Both | Yes | No | SupportedProtVersion_15118 | |
| Retrieve OCSP certificate status | Both | Yes | 15118CheckOCSPCertStatus | No | CheckOCSPCertStatus_15118 |
| VW V2G Extension | Both | Yes | VWV2GExt | No | VWV2GExt_15118 |
| 15118 connection strictness | Master | Yes | P15118ConStrictTls | No | P15118ConStrictTls_15118 |
| RCD Auto Reclosure | Both | Yes | RCDAUTORECLOSURE | No | RcdAutoReclosure_mon |
| RCD Enable | Both | Yes | RCDENABLE | No | RcdEnable_mon |
| RCD Retrip Enable | Both | Yes | RCDRETRIPENABLE | No | RcdRetripEnable_mon |
| MCB Enable | Both | Yes | MCBENABLE | No | McbEnable_mon |
| SPD Config | Individual | Yes | SPDCFG | No | SPDConfig_mon |
| Fan or heater control configuration | Both | Yes | VentHeatingCtrlMode | No | VentHeatingTempCtrlMode_mon |
| Light sensor on/off | Individual | No | LightSensorEnable | No | MonitorLightSensor_mon |
| Tilt detection | Both | Yes | TiltDetection | No | TiltSensor_mon |
| Weld check output | Both | No | WeldCheckAuxRelay | No | WeldCheckAuxRelay_mon |
| RCD auto reclosure delay | Both | Yes | RCDAUTORECLOSUREDELAY | No | RcdAutoReclosureDelay_mon |
| RCD auto reclosure attempts | Both | Yes | RCDAUTORECLOSUREATTEMPTS | No | RcdAutoReclosureAttempts_mon |
| Fan or heater control hysteresis configuration | Both | Yes | VentHeatingHyst | No | VentHeatingHyst_mon |
| Temperature threshold for fan or heater control | Both | Yes | VentHeatingTempThr | No | VentHeatingTempThr_mon |
| Charging Station temperature delta | Individual | No | AmbientCpuDelta | No | TempControlAmbientCpuDelta_mon |
| Garo Top Board as RCD/MCB input | Both | Yes | GaroBoard | No | GaroBoard_mon |
| Local time for housekeeping reboot | Both | Yes | LocalScheduledReboots | No | LocalTimeToReboot_mon |
| Number of days for housekeeping reboot | Both | No | DaysScheduledReboots | No | DaysToReboot_mon |
| Charging current to reduce temperature [A] | Individual | No | ReducedCurrent | No | TempControlReducedCurrent_custom |
| Charging current (in % from signaled current) to reduce temperature | Individual | No | ReducedCurrentPct | No | TempControlReducedPercentage_custom |
| Temperature Report Delta | Master | No | TempDelta | No | TempDelta_mon |
| Contactor Monitoring Input | Not relevant | Yes | No | CONTACTOR_WATCHDOG_INPUT_mon | |
| Temperature threshold 2 | Individual | No | TempStopThreshold2 | No | TempControlStopThr_mon |
| Temperature threshold 1 | Individual | No | TempReduceThreshold1 | No | TempControlReduceThr_mon |
| Derating wallbox 1 threshold 1 | Individual | No | DeratingWallbox1Thresh1 | No | DeratingWallbox1Thresh1_mon |
| Derating wallbox 1 threshold 2 | Individual | No | DeratingWallbox1Thresh2 | No | DeratingWallbox1Thresh2_mon |
| Derating wallbox 1 threshold 3 | Individual | No | DeratingWallbox1Thresh3 | No | DeratingWallbox1Thresh3_mon |
| Derating wallbox 2 threshold 1 | Individual | No | DeratingWallbox2Thresh1 | No | DeratingWallbox2Thresh1_mon |
| Derating wallbox 2 threshold 2 | Individual | No | DeratingWallbox2Thresh2 | No | DeratingWallbox2Thresh2_mon |
| Derating wallbox 2 threshold 3 | Individual | No | DeratingWallbox2Thresh3 | No | DeratingWallbox2Thresh3_mon |
| Derating dc plus threshold 1 | Individual | No | DeratingDcPlusThresh1 | No | DeratingDcPlusThresh1_mon |
| Derating dc plus threshold 2 | Individual | No | DeratingDcPlusThresh2 | No | DeratingDcPlusThresh2_mon |
| Derating dc minus threshold 1 | Individual | No | DeratingDcMinusThresh1 | No | DeratingDcMinusThresh1_mon |
| Derating dc minus threshold 2 | Individual | No | DeratingDcMinusThresh2 | No | DeratingDcMinusThresh2_mon |
| Derating hmi humi threshold 1 | Individual | No | DeratingHmiHumiThresh1 | No | DeratingHmiHumiThresh1_mon |
| Derating hmi humi threshold 2 | Individual | No | DeratingHmiHumiThresh2 | No | DeratingHmiHumiThresh2_mon |
| Derating hmi humi threshold 3 | Individual | No | DeratingHmiHumiThresh3 | No | DeratingHmiHumiThresh3_mon |
| Derating hmi disp threshold 1 | Individual | No | DeratingHmiDispThresh1 | No | DeratingHmiDispThresh1_mon |
| Derating hmi disp threshold 2 | Individual | No | DeratingHmiDispThresh2 | No | DeratingHmiDispThresh2_mon |
| Derating hmi disp threshold 3 | Individual | No | DeratingHmiDispThresh3 | No | DeratingHmiDispThresh3_mon |
| Derating hmi phyt threshold 1 | Individual | No | DeratingHmiPhytThresh1 | No | DeratingHmiPhytThresh1_mon |
| Derating hmi phyt threshold 2 | Individual | No | DeratingHmiPhytThresh2 | No | DeratingHmiPhytThresh2_mon |
| Derating hmi phyt threshold 3 | Individual | No | DeratingHmiPhytThresh3 | No | DeratingHmiPhytThresh3_mon |
| Derating hmi alm threshold 1 | Individual | No | DeratingHmiALMThresh1 | No | DeratingHmiAlmThresh1_mon |
| Derating hmi alm threshold 2 | Individual | No | DeratingHmiAlmThresh2 | No | DeratingHmiAlmThresh2_mon |
| Derating mainboard threshold 1 | Individual | No | DeratingMainboardThresh1 | No | DeratingMainboardThresh1_mon |
| Derating mainboard threshold 2 | Individual | No | DeratingMainboardThresh2 | No | DeratingMainboardThresh2_mon |
| Derating mainboard threshold 3 | Individual | No | DeratingMainboardThresh3 | No | DeratingMainboardThresh3_mon |
| Derating coupling mainboard threshold 1 | Individual | No | DeratingCoupBoardThresh1 | No | DeratingCoupBoardThresh1_mon |
| Derating coupling mainboard threshold 2 | Individual | No | DeratingCoupBoardThresh2 | No | DeratingCoupBoardThresh2_mon |
| Derating coupling mainboard threshold 3 | Individual | No | DeratingCoupBoardThresh3 | No | DeratingCoupBoardThresh3_mon |
| Derating DCC mainboard threshold 1 | Individual | No | DeratingDccBoardThresh1 | No | DeratingDccBoardThresh1_mon |
| Derating DCC mainboard threshold 2 | Individual | No | DeratingDccBoardThresh2 | No | DeratingDccBoardThresh2_mon |
| Derating DCC mainboard threshold 3 | Individual | No | DeratingDccBoardThresh3 | No | DeratingDccBoardThresh3_mon |
| Derating stoke threshold | Individual | No | DeratingStokeThresh | No | DeratingStokeThresh_mon |
| Derating stoke threshold connector | Individual | No | DeratingStokeThreshConnector | No | DeratingStokeThreshConnector_mon |
| Current limit for energy management derating option | Individual | Yes | DeratingDcSysCurrentLimit | No | DeratingDcSysCurrentLimit_mon |
| Actuator Lock-Unlock Cycle | Both | No | ActuatorLockUnlockCycle | No | PlugCycle_mon |
| Wlan connection status | Master | No | No | WlanConnectionStatus_mon | |
| Backend controlled mode for inputs and outputs | Both | Yes | InputOutputBackendControlledMode | No | InOutputBackendControlled_iom |
| Backend notification for input changes | Both | No | InputChangeNotifyBackend | No | InputChangeNotifyBackend_iom |
| DC Meter Configuration | Individual | Yes | EVMeterType | No | ConfigEV_meter |
| Configuration | Individual | Yes | OCPPMeterType | No | Config_meter |
| Meter configuration (Second) | Master | Yes | SecondMeterType | No | ConfigSecond_meter |
| Baud Rate for MODBUS/RTU | Individual | Yes | No | MeterModbusRTUBaud_meter | |
| Baud Rate for MODBUS/RTU (second bus) | Individual | Yes | No | MeterModbusRTUBaudSecond_meter | |
| Parity for MODBUS/RTU | Individual | Yes | No | MeterModbusRTUParity_meter | |
| Parity for MODBUS/RTU (second bus) | Individual | Yes | No | MeterModbusRTUParitySecond_meter | |
| Stop bits for MODBUS/RTU | Individual | Yes | No | MeterModbusRTUStop_meter | |
| Stop bits for MODBUS/RTU (second bus) | Individual | Yes | No | MeterModbusRTUStopSecond_meter | |
| MODBUS timeout [s] for MODBUS/RTU | Individual | No | No | MeterModbusTimeout_meter | |
| MODBUS polling frequency [ms] | Individual | No | No | MeterModbusPollingFrequency_meter | |
| DC meter timeout [s] | Individual | No | No | MeterEVTimeout_meter | |
| MODBUS address of main meter | Individual | Yes | No | MeterModbusOcppAddr_meter | |
| MODBUS address of secondary meter | Individual | Yes | No | MeterModbusSecondAddr_meter | |
| OCPP Via Local Network minimum value '1' | Both | No | OCPPViaLocalNetwork | No | OCPPViaLocalNetwork_meter |
| Meter Value Sample Interval (OCPP) | Both | No | MeterValueSampleInterval | No | MeterValueSampleInterval_meter |
| Meter Value Sample Mode (OCPP) | Both | No | MeterValueSampleMode | No | MeterValueSampleMode_meter |
| Clock aligned data interval (OCPP) | Both | Yes | ClockAlignedDataInterval | No | ClockAlignedDataInterval_meter |
| Clock aligned random sent delay in seconds (OCPP) | Both | Yes | ClockAlignedMeterRandomSendDelay | No | ClockAlignedMeterRandomSendDelay_meter |
| Meter values aligned data (OCPP) | Both | No | MeterValuesAlignedData | Yes | MeterValuesAlignedData_meter |
| Meter values sampled data (OCPP) | Both | No | MeterValuesSampledData | Yes | MeterValuesSampledData_meter |
| Stop transaction sampled data (OCPP) | Both | No | StopTxnSampledData | Yes | StopTxnSampledData_meter |
| Stop transaction aligned data (OCPP) | Both | No | StopTxnAlignedData | Yes | StopTxnAlignedData_meter |
| IP address of OCPP meter | Individual | Yes | No | OcppMeterIPAddress_meter | |
| Port number of OCPP meter | Individual | Yes | No | OcppMeterTCPPortNumber_meter | |
| IP address of second meter | Master | Yes | SecondMeterIPAddress | No | SecondMeterIPAddress_meter |
| Port number of Second Meter | Master | Yes | SecondMeterTCPPortNumber | No | SecondMeterTCPPortNumber_meter |
| Pulses per kWh (S0 meter) | Not relevant | No | No | S0MeterPulsesPerKWh_meter | |
| Pulses per kWh (Second S0 meter) | Not relevant | No | No | S0MeterPulsesPerKWhSecond_meter | |
| Restart transaction after power loss | Both | Yes | RestartTransAfterPowerLoss | No | RestartAfterPowerLoss_meter |
| Current flow direction of L1 of primary meter | Individual | Yes | CurrentDirPrimaryL1 | No | CurrentDirPrimaryL1_meter |
| Current flow direction of L2 of primary meter | Individual | Yes | CurrentDirPrimaryL2 | No | CurrentDirPrimaryL2_meter |
| Current flow direction of L3 of primary meter | Individual | Yes | CurrentDirPrimaryL3 | No | CurrentDirPrimaryL3_meter |
| Current flow direction of L1 of second meter | Individual | Yes | CurrentDirSecondL1 | No | CurrentDirSecondL1_meter |
| Current flow direction of L2 of second meter | Individual | Yes | CurrentDirSecondL2 | No | CurrentDirSecondL2_meter |
| Current flow direction of L3 of second meter | Individual | Yes | CurrentDirSecondL3 | No | CurrentDirSecondL3_meter |
| Enable HTTPS | Both | Yes | No | EnableHTTPS_encryption | |
| Authorization Input | Not relevant | Yes | AuthorizationInput | No | AUTHORIZATION_INPUT_custom |
| Custom web configuration title | Not relevant | Yes | No | WebUICustomTitle_web | |
| Append manufacturer serial to configuration title | Not relevant | Yes | No | WebUITitleSerial_web | |
| Hierarchical Dynamic Load Management - DLM Coordinator | Master | Yes | DlmHierarchicalMode | No | DlmCMode_dlmc |
| DLM master fallback current | Master | Yes | DlmcMaximumFallbackCurrent1 DlmcMaximumFallbackCurrent2 DlmcMaximumFallbackCurrent3 | No | DlmcMaximumFallbackCurrent_dlmc |
| Publish constraints for DLM coordinator | Master | Yes | DlmcPublishConstraints | No | DlmcPublishConstraints_dlmc |
| Dynamic Load Management - DLM Master/Slave | Individual | Yes | DlmMode | No | DlmMode_dlm |
| Configure Solar Mode for DLM | Master | Yes | DlmSolarMode_dlm | No | DlmSolarMode_dlm |
| DLM Network Id | Master | Yes | DlmDiscoveryNetworkId | No | DlmDiscoveryNetworkId_dlm |
| DLM Master IP and port | Master | Yes | DlmMasterIp | No | DlmMasterIp_dlm |
| EVSE Sub-Distribution Limit (L1/L2/L3) [A] | Master | Yes | DlmPhase1Limit DlmPhase2Limit DlmPhase3Limit | No | DlmPhaseLimit_dlm |
| Operator EVSE Sub-Distribution Limit (L1/L2/L3) [A] | Master | No | DlmOperatorPhase1Limit DlmOperatorPhase2Limit DlmOperatorPhase3Limit | No | DlmOperatorLimit_dlm |
| Main Distribution Limit (L1/L2/L3) [A] | Master | Yes | DlmExtMeterMainDistributionLimitPhase1 DlmExtMeterMainDistributionLimitPhase2 DlmExtMeterMainDistributionLimitPhase3 | No | DlmExternalMeterMainDistLimit_dlm |
| External Load Headroom (L1/L2/L3) [A] | Master | No | DlmExtLoadHeadroomPhase1 DlmExtLoadHeadroomPhase2 DlmExtLoadHeadroomPhase3 | No | DlmExternalLoadHeadroom_dlm |
| External Load Averaging Length [sec] | Master | Yes | DlmExtLoadAvgLen | No | DlmExternalLoadAvgLen_dlm |
| Disconnected Limit [A] | Both | Yes | DlmDisconnectedLimit | No | DlmDisconnectedLimit_dlm |
| Minimum Current Limit [A] | Both | Yes | DlmMinCurrentRating | No | DlmMinCurrentRating_dlm |
| Solar Mode on this charger | Both | Yes | DlmSlaveSolarEnabled | No | DlmSlaveEnableSolar_dlm |
| Current Imbalance Limit [A] | Master | Yes | DlmCurrImbalanceLim | No | DlmCurrImbalanceLimit_dlm |
| External Load Fallback (L1/L2/L3) [A] | Master | Yes | DlmExtMeterLoadFallbackPhase1 DlmExtMeterLoadFallbackPhase2 DlmExtMeterLoadFallbackPhase3 | No | DlmExternalLoadFallback_dlm |
| Ext. Input 1 Current Offset (L1/L2/L3) [A] | Master | Yes | DlmInput1CurrOffsetPhase1 DlmInput1CurrOffsetPhase2 DlmInput1CurrOffsetPhase3 | No | DlmInput1OffsetPhase_dlm |
| Ext. Input 2 Current Offset (L1/L2/L3) [A] | Master | Yes | DlmInput2CurrOffsetPhase1 DlmInput2CurrOffsetPhase2 DlmInput2CurrOffsetPhase3 | No | DlmInput2OffsetPhase_dlm |
| Meter Digital Input Current Offset (L1/L2/L3) [A] | Master | Yes | DlmInput3CurrOffsetPhase1 DlmInput3CurrOffsetPhase2 DlmInput3CurrOffsetPhase3 | No | DlmInput3OffsetPhase_dlm |
| Charging Log | Master | Yes | No | DlmChargingLog_dlm | |
| External Meter Log | Master | Yes | No | DlmExternalMeterLog_dlm | |
| DLM Log | Master | No | No | DlmDlmLog_dlm | |
| External Meter Support | Master | Yes | DlmExtMeterEnabled | No | DlmExternalMeterEnabled_dlm |
| External Meter Location | Master | Yes | DlmExtMeterLocation | No | DlmExternalMeterLocation_dlm |
| Current Imbalance Prevention | Master | Yes | DlmCurrImbalancePreventionEnabled | No | DlmCurrImbalanceLimitEnabled_dlm |
| Disable Discovery Broadcasting | Master | Yes | DlmDisableDiscoveryBroadcast | No | DlmDiscoveryDisableBroadcast_dlm |
| Maximum Current Scheduler | Master | Yes | No | DlmTimeTableEnabled_dlm | |
| DLM Algorithm Sample Rate | Master | No | DlmRecalcInterval | No | DlmAlgoSampleRate_dlm |
| IT Network | Master | Yes | No | DlmITNetworkEnabled_dlm | |
| Persistent DLM slave count | Master | No | DlmPersistentSlavesCount | No | DlmPersistentSlavesCount_dlm |
| Clear persistent DLM slave DB | Master | No | DlmClearPersistentSlaves | No | DlmClearPersistentSlaves_dlm |
| External Input 1 Config | Master | Yes | DlmInput1CurrOffsetCfg | No | DlmInput1CurrOffsetConfig_dlm |
| External Input 2 Config | Master | Yes | DlmInput2CurrOffsetCfg | No | DlmInput2CurrOffsetConfig_dlm |
| Meter Digital Input Config | Master | Yes | DlmInput3CurrOffsetCfg | No | DlmInput3CurrOffsetConfig_dlm |
| External Input 1 Polarity | Master | Yes | DlmInput1Polarity | No | DlmInput1Polarity_dlm |
| External Input 2 Polarity | Master | Yes | DlmInput2Polarity | No | DlmInput2Polarity_dlm |
| Modbus TCP Server for energy management systems | Both | Yes | ModbusSlaveTCPConfigOnOff | No | TCPConfigOnOff_modbus_slave |
| Modbus TCP Server Register Address Set | Both | Yes | ModbusSlaveRegAddrSet | No | RegAddrSet_modbus_slave |
| Modbus TCP Server Allow Start/Stop Transaction | Both | Yes | ModbusSlaveAllowStartStop | No | AllowStartStop_modbus_slave |
| Modbus TCP Server Allow UID Disclose | Both | Yes | ModbusSlaveAllowUIDDisclose | No | AllowUIDDisclose_modbus_slave |
| Modbus TCP Server Base Port | Master | Yes | ModbusSlaveTCPPort | No | TCPPortNumber_modbus_slave |
| Modbus TCP Server Communication Timeout | Both | Yes | ModbusSlaveCommTimeout | No | CommTimeout_modbus_slave |
| Modbus TCP Server Device Address | Individual | Yes | ModbusSlaveDevAddr | No | SlaveDeviceAddress_modbus_slave |
| SEMP interface | Master | No | SMAInterfaceOnOff | No | SempGatewayConfigOnOff_semp_gateway |
| Charging Mode | Master | No | SMAChargingMode | No | SempGatewayChargingMode_semp_gateway |
| Time to connection failure [s] | Master | No | SMACommunicationTimeout | No | SempGatewayCommunicationTimeout_semp_gateway |
| Current in case of connection failure [A] | Master | No | SMACommunicationTimeoutCurrent | No | SempGatewayFallbackCurrent_semp_gateway |
| Maximum energy demand [kWh] | Master | No | SMAMaxEnergyDemand | No | SempGatewayMaxEnergyDemand_semp_gateway |
| Minimum energy demand [kWh] | Master | No | SMAMinEnergyDemand | No | SempGatewayMinEnergyDemand_semp_gateway |
| Scheduled departure time [hh:mm] | Master | No | SMAChargeCompleteTime | No | SempGatewayMaxChargingTime_semp_gateway |
| EEBus interface | Master | No | EEBUSConfigOnOff | No | EEBUSConfigOnOff_eebus |
| Coordinated Charging Mode | Master | No | EEBUSConfigCevcOnOff | No | EEBUSConfigCevcOnOff_eebus |
| Current in case of connection failure [A] | Master | No | EEBUSFallbackCurrent | No | EEBUSFallbackCurrent_eebus |
| Communication Timeout [s] | Master | No | EEBUSCommunicationTimeout | No | EEBUSCommunicationTimeout_eebus |
| Connect or disconnect the energy manager | Master | No | EEBUSPairingActionSelectorExt | No | EEBUSPairingActionSelector_eebus |
| Connect or disconnect the energy manager | Master | No | No | EEBUSPairingActionSelectorLegacy_eebus | |
| Identifier of the coupled energy manager | Master | No | EEBUSPairedCemId | No | EEBUSPairedCemIdentification_eebus |
| SKI of the coupled energy manager | Master | No | EEBUSPairedCemSki | No | EEBUSPairedCemSki_eebus |
| Coupling status of the energy manager | Master | No | No | EEBUSPairingStatus_eebus | |
| Charging Summary | Master | No | No | EEBUSChargingSummary_eebus | |
| EEBus stack version | Master | No | No | EEBusStackVersion_eebus | |
| EEBus SKI device identification | Master | No | No | EEBusSKIDeviceIdentification_eebus | |
| Fail-safe current | Individual | Yes | No | FailSafeCurrent_hems | |
| HEMS Current Limit | Individual | Yes | No | CurrentLimit_hems | |
| Charging Mode | Master | No | HemsConfigChargingMode | No | ChargingMode_hems |
| Maximum energy demand [kWh] | Master | No | HemsConfigMaxEnergyDemand | No | MaxEnergyDemand_hems |
| Minimum energy demand [kWh] | Master | No | HemsConfigMinEnergyDemand | No | MinEnergyDemand_hems |
| Optimal energy demand [kWh] | Master | No | HemsConfigOptEnergyDemand | No | OptEnergyDemand_hems |
| Scheduled departure time [hh:mm] | Master | No | HemsConfigChargeCompleteTime | No | MaxChargingTime_hems |
| CCS Mode 4 Plug Lifetime | Individual | Yes | No | CCSMode4PlugLifetime_dc | |
| CCS Mode 4 Plug Cycles | Individual | No | ResetMode4PlugCounterTo | No | CCSMode4PlugCounter_dc |
| CCS Mode 4 Plug Cycles | Not relevant | No | CCSMode4PlugCounter | No | CCSMode4PlugCounterRO_dc |
| Send parking space occupancy data to backend | Not relevant | Yes | BannerEnabled | No | BannerEnabled_banner |
| Transmit additional analogue sensor values | Not relevant | Yes | BannerReadAnalog | No | BannerReadAnalog_banner |
| Interval to retrieve data from the gateway (s) | Not relevant | Yes | BannerPollInterval | No | BannerPollInterval_banner |
| Interval for sending data via OCPP (s) | Not relevant | Yes | BannerSendInterval | No | BannerSendInterval_banner |
| Number of connected parking sensors | Not relevant | Yes | BannerMaxNodeId | No | BannerMaxNodeId_banner |
| Update geolocation data | Master | No | GeolocationUpdate | No | UpdateGeolocationButton_custom |
| Delete all Smart Charging profiles | Master | Yes | Not Available | No | DeleteAllSmChrgProfilesButton_custom |
| EEBUSStartPairingButton | Master | No | Not Available | No | EEBUSStartPairingButton_eebus |
| EEBUSClearPairingButton | Master | No | Not Available | No | EEBUSClearPairingButton_eebus |